ELECTRICAL INFORMATION

Before using this appliance ensure that the voltage of you electricity supply is the same as indicated on our appliance.

BEFORE USE  

Remove all packaging from the appliance.

Wash all the removable parts in warm soapy water, rinse well and dry.

Make sure the blender is the position of switching OFF.

OPERATIONS

Align the centering pad over the four posts in the motor base and push it into place. Place the container in the center and ensure the driving socket clutches the blade assembly securely.

Feed the foodstuff. Put the lid on the container and close securely.

Plug the appliance and switch on all the mains.

To accelerate the processing you may use tamper to mix evenly.

To achieve the best processing performance in particular to solid food ingredients, avoid putting too much foodstuff into the container.

For processing solid or quite thick liquid ingredients, we suggest that you use the PULSE mode for impulse powerful movement to prevent the blades becoming stuck.

CLEANING & STORAGE

Power OFF the appliance.

Unplug the unit from the mains.

Dissemble the unit.

Clean out any material from the container with a plastic spatula or brush.

Do not clean inside the container by hand unless the blade is already removed.

Wash all the removable items in warm soapy water. Brush the blade and container free of all adhered material, rinse well and dry.

It is essential to keep the blade assembly clean and free from any obstruction.

Wipe the outer surface of the motor unit with damp cloth. Pay special attention to the area around the motor rotor.

Never use abrasive cleaners or scouring creams. Never immerse the base unit or the cable in water.

After cleaning, wrap the cable , re-assemble the blender fully and stow it out if direct sunlight and out of reach of children.

HINTS  & TIPS

This blender is designed to be with an over-current protector at the back of unit for safety purpose.(For model BA0151 it is at the bottom of the machine). In case the appliance cannot work, press the button of this safety protector and then reset the appliance.